When the Halftone option is turned on the image displayed in K40 Whisperer will be shown in grayscale. In order to generate the halftone image in K40 Whisperer the Halftone setting in the Raster settings needs to be selected. The truck photo came from Wikimedia Commons: Madrid_-_Fargo_Power-Wagon OK, let’s talk about software to control your stock K40 control board (M2 Nano). However, grayscale can be simulated by creating a halftone image (dithering) of the raster image.īelow is an example of an image that was engraved with the Halftone (Dither) option turned on in K40 Whisperer. NedMan (Ned Hill) February 10, 2019, 1:34am 1. The stock boards that work with K40 Whisperer are not able to control the power output by the laser. In addition to red, blue and black, you can also do grayscale with K40 Whisperer. K40 Whisperer reads SVG and DXF files, interprets the data and sends commands to the K40 controller to move the laser head and control the laser accordingly. Halftone (grayscale) Images with K40 Whisperer If you decide you do not want to use K40 Whisperer you will need to remove the libUSB-win32 driver before the program that came with you K40 (Laser Draw or Corel Draw with Corel Laser) will work. K40 Whisperer is an alternative to the Laser Draw (LaserDRW) program that comes with the cheap Chinese laser cutters available on E-Bay and Amazon. Open the SVG file you just saved in K40 Whisperer. Within Inkscape select "Save" to save the design as an SVG file.Ĥ. Adjust the size of the document to match the area you want to export (You can use "File" - "Document Properties" - "Resize Page to Content" to make the page the same size as your design)ģ. (Raster Engraving is not supported for DXF files.)Ģ. Use BLACK and other colors to indicate raster engraving. Use BLUE lines to indicate vector engraving. If a laser works with Laser Draw it should work with K40 Whisperer. The best way to determine if a laser will work with K40 Whisperer before buying is to check if the laser comes with LaserDRW (Laser Draw) software. Linux: Setup instructions for Linux are included via the READMELinux.txt file in the '' file. 6C6879-LASER-M2 ( M2 Nano: This is the default board setting)) Windows: Setting up K40 Whisperer on Windows.6C6879-LASER-M3 ( M3 Nano: For M3 Nano use the default board setting (i.e.(The controller board is the circuit board the USB cable plugs into)Ĭontroller Boards Known to Work with K40 Whisperer: You can also look at the markings on the controller board. To see which board you have you can go to "Properties" from the LaserDRW (or CorelDraw) Engraving Manager window and look at which board is selected for the "Mainboard" option. The boards that work with K40 Whisperer are made by Lihuiyu. Only boards that work with LaserDRW will work with K40 Whisperer.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |